Home » Products » NMEA 2000 (Maretron)

NMEA-2000 (Maretron)

[hr top]

■ Display & Alarms

DSM250 Multi-Function Color Displays

● Sunlight Viewable
● Interprets and Displays all NMEA 2000® Data
● 16 User Configurable Favorites Screens
● Computed Fuel Management Displays
● Flush, Surface, or Gimbaled Mount
● Available in Black, Gray, and White Enclosures
● Configures Maretron Products
● Audio and Visual Alarms.

dsm250 nmea2000 multi function color display
Click for details

ALM100 Alarm Module

● Visual & Audible Alerts
– Triggered by N2KView or DSM250
● Loud Alarm(105dB)
– Mechanical Damper
– Distinctly Selectable Tone Patterns
● Green Operating LED and Red Alarm LED
● Mounts in Standard Electrical Box
● Waterproof
● Black or White Face Plate

alm100 nmea2000 alarm module
Click for details

[hr top]

■ Engine/Vessel Monitoring

J2K100 J1939 to NMEA 2000 Gateway

● Converts J1939 Data to NMEA 2000® Data for Display on Compatible Equipment (Furuno, Garmin, Maretron, Raymarine)
● Attaches to Any J1939 Engine, Transmission, or Genset
– Caterpillar, Cummins, Detroit Diesel, John Deere, Kohler, Northern Lights, Onan, Perkins, Steyr, Volvo Penta, Yanmar, etc.
● Converts Following Data
– AC Generator Current, Frequency, Voltage, Tach, Hours, Coolant Pressure & Temp, Oil Pressure & Temp, Fuel Rate, etc.

2k100 nmea2000 j1939 to nmea2000 gatewayy
Click for details

EMS100 Analog Engine Monitoring System

● Converts Analog Data to NMEA 2000® Digital Data
● Converts Following Data if Engine is Equipped with Sensors
– Tach, Hours, Water Temp, Oil & Boost Pressure, Volts, Trim
● Converts Engine Alarms if Engine is Equipped with Switches
– Fuel, Boost, Coolant Level & Temp, Oil Pressure, Exhaust Flow
● Plugs Directly into Engine Wiring Harnesses
● Used With or Without Analog Gauges

ems100 nmea2000 analog engine monitoring system
Click for details

TLA100 Tank Level Adapter

● Adapts Resistive Tank Senders to NMEA 2000®(Royce, WEMA, etc.)
● American(240-30 ohm) or European(10-180 ohm) Standard Compatible
● Can be Calibrated for Irregular Shaped Tanks
● Can be Used With or Without Analog Gauges
● 16 Point Calibration
● Supports All Tank Types
– Fuel, Fresh Water, Waste Water, Live Well, etc

tla100 nmea2000 tank level adapter
Click for details

RAA100 Rudder Angle Adapter

● Adapts Resistive Rudder Senders to NMEA 2000®
● American(240-30 ohm) or European(10-180 ohm) Standard Compatible
● Can Be Used With or Without Analog Gauges
● End Point Calibration for Different Rudder Stop Angles

raa100_rudder_angle_adapte
Click for details

[hr top]

■ Vessel Monitoring & Control PC SW/Interfacing

N2KView Vessel Monitoring & Control Software

● Server/Client Architecture
– Server Collects Information from NMEA 2000® Network and Distributes Data to Clients via Standard Internet Protocol
– Clients May Reside on Same Computer as Server, or Other Vessel Computers Networked via Ethernet, or Remote Computers via Internet Connection.

n2kview vessel monitoring control software
Click for details

Vessel Monitoring & Control Software

● N2KView – Basic
– Vessel Monitoring Including Engines, Gensets, Tanks, Rudders, Navigation Instruments, Weather, Battery Monitor, DC/AC Parameters, Safety Systems, Security Systems, Etc.
● N2KView – Platinum
– Fuel Management
– Alerts (Alarms and Warnings)
– Electrical Switching*
– Local and Remote Video*
– Logging

n2kview vessel monitoring control sysyem mobile
Click for details

USB100 NMEA 2000/USB Gateway

● Bridges Computer to NMEA 2000® Network
● Enables PC Based Vessel Monitoring Software(N2KView)
● Enables PC Based Navigation Software(Nobeltec, Rose Pointe, MaxSea, etc.)
● Enables PC Based Diagnostic Tools(N2KAnalyzer)
● One simple connection from PC to NMEA 2000®

n2kview vessel monitoring control sysyem mobile
Click for details

[hr top]

■ Cables and Connectors

Cables and Connectors

● Simple Trunk & Drop Line Topology Connects all NMEA 2000® Equipment
● Single Drop Line Allows Component Connect or Disconnect Under Power
● Cable Includes Power and Ground Up to 1 Amp per Product
● Keyed Connectors Error Free Hook Up
● Screw Thread Connectors Eliminates Inadvertent Disconnects
● Waterproof Connection System Works Even While Submerged
● 3 Independent Shields For Reduced EMI
● Gold Plated Terminals for Reliable Connections
● Nickel Plated Brass Connectors Ideally Suited to Marine Environment
● Cable and Connector Approvals
– NMEA 2000, IEC 61162-3, Lloyds
● 3 Cable Sizes(Micro, Mid, Mini)
– Micro and Mid Use Same Connectors
– All Use Same 5 Wire Color Coding
– All Cabling Systems are 12 Volt
– Micro Cable
– Small/Short Networks(<10 Nodes)
– Rated to 4 Amps
– Voltage Drops of Concern- Mid Cable(ABYC Approved)
– Mid/Large Networks
– Rated to 4 Amps- Mini Cable(ABYC Approved)
– Large Networks
– Rated to 8 Amps.

nmea2000 micro mid cable and connector
Click for details

Micro Cables and Connectors

● Micro Bulk Cable
– Three Levels of Shielding, Data Pair, Power Pair, and Overall
– 22 Gauge Power Pair Rated to 4 Amps
– Micro/Mid Field Attachable Connectors
– Used With Bulk Cable to Build Cordset
– Color Coded Screw Terminals Match Wire Colors for Error Free Installation
● Micro/Mid 90° Field Attachable Connectors
– Used for Tight Corners(i.e., Behind Displays)
● Micro Double-Ended Cordsets
– Waterproof to IP68(Submersible)
– Available in Various Lengths(0.5 to 10 Meter)
● Micro/Mid Tee
– Used to Insert Cable Drop to Electronic Product
– Keyed Connectors for Error Free Connections
● Micro/Mid Power Tap Tee
– Two 18 Gauge Power Pairs for Feeding 4 Amps to Both Sides of Network
– Meets ABYC Minimum Power Gauge Wire Size Requirements
● Micro/Mid Termination Resistors
– Available in Both Male and Female Genders
– Inline Terminator Used Where Network Terminated at Product(i.e., Top of Mast at Wind Sensor)
● Micro/Mid Bulk Head Feed-Thru
– Used to Maintain Watertight Integrity Through Bulk heads
● Micro/Mid Multiport Box
– Used for Congested Product Areas(i.e., Under Helm)
– Used with Double-Ended Cordset for Multiport Feed and Drops.

nmea2000 micro mid attachable connector
Click for details

Mini Cables and Connectors

● Mini Bulk Cable(Gray and Blue)
– Three Levels of Shielding, Data Pair, Power Pair, and Overall
– 15 Gauge Power Pair Rated to 8 Amps
● Mini Field Attachable Connectors
– Used With Bulk Cable to Build Cordsets
– Color Coded Screw Terminals Match Wire Colors for Error Free Installation
● Mini Double-Ended Cordsets
– Waterproof to IP68(Submersible)
– Available in Various Lengths(0.5 to 10 Meter)
● Mini Double-Ended Cordsets
– Waterproof to IP68(Submersible)
– Available in Various Lengths(0.5 to 10 Meter)
● Mini Tees
– Used to Insert Cable Drop to Electronic Product
– Keyed Connectors for Error Free Connections
● Mini Power Tap Tee
– Independent Left and Right Network Fuses
– 16 Amp Feed – 8 Amps to Left and 8 Amps to Right
● Mini Termination Resistors
– Available in Both Male and Female Genders
– Available With Diagnostic LEDs
● Mini 90° Elbow
– Used for Tight Corners
● Mini to Micro/Mid Reducer
– Used to Change Cable Sizes(i.e., Mini Backbone to Mid Cable for Running Up Mast)
● Mini Gender Changers
– Available in Both Male and Female Genders
● Mini Bulk Head Feed-Thru
– Used to Maintain Watertight Integrity Through Bulk heads
● N2KMeter
– Cable and Connector Diagnostic Tool
– 250 Test Automatically Run When Plugged Into Network with Easy to Understand Results
– Data Can be Logged and Locked Into Unit for Later Analysis by Trained Personnel.

nmea2000 mini cable and connector
Click for details

[hr top]