ZMG-340NTP Network Time Protocol Server
ZMG-340NTP Server receives time information from GPS receiver and synchronization of internal clock and transmits the received time information to external equipment using NTP(Network Time Protocol).
It is used for responding when receiving for synchronization clock request from the client. User also can passively broadcast or multicast in the place where receives to time update by using ZMG-340NTP.
ZMG-340NTP Network Time Protocol Server
90 x 138 x 42 mm / 0.5kg
Brochure
1. Features
Will be updated soon.
2. Specifications
| 1) Serial | |
| 4 Serial Ports | – Each Serial port is selected as Tx or Rx by internal jumper. – Max 4 Rx channels, galvanic isolated. (NMEA-0183, RS-422, RS-232, TTL and Current-Loop signals acceptable) – Max 4 Tx channels, RS-422 Output (NMEA-0183) – Max 2 RS-485 bidirectional channels |
| Protection | – A Protection against Over voltage input (up to 32V) |
| Baud Rate | – 1,200bps ~ 230,400bps by each port (9 Steps) |
| Sentence | – Support ‘ZDA’ Sentence (‘RMC’ will be added) – Support to select input channel |
| 2) Ethernet | |
| Ethernet | – 10 / 100 Base T Ethernet, Automatic Tx/Rx Sense – Support NTP Broadcast, Multicast, Unicast (Query) Mode – Support NTP Version 3/4 – Web Based Configuration |
| NTP Protocol | – Unicast Mode : UDP on port number 123 – Broadcast/Multicast Mode : User can set IP address, Port number, Period. |
| 3) Physical Specifications | |
| Dimension | – 90 x 138 x 42mm |
| Weight | – 0.5kg (Including Terminal blocks) |
| – This specifications may be changed without any notifications. – If you advise good idea or improvement or any other specifications for our products, then we will strongly consider it. |
|