NMEA Tester / Monitor / Simulator
The [dropcap1]Z[/dropcap1]NT-300 NMEA Tester is a sub-compact and ultra-light portable and NMEA Tester, NMEA Monitor, NMEA Simulator, NMEA Generator, Pulse Generator are completely built in the ZNT-300.
We certain that the tester is a required product for every field engineer. The ZNT-300 is the world’s
NMEA Tester – ZNT-300 (Monitor/Simulator)
NMEA Tester is essential tool for every engineer. Three major functions – NMEA 0183 Sentence Monitor, NMEA 0183 sentences Generator (NMEA 0183 Simulator) and generator are built in it.
Also, it can monitor NMEA 0183 (or serial) data without any signal loss on communication between talker and listener. In addition, it check baud-rate automatically.
Therefore, using the tester gives you the following advantages.
– Monitoring, checking error, auto detecting the baud-rate and display NMEA 0183 data for testing of NMEA 0183 Talker.
– Generate 16 NMEA 0183 sentences for testing of NMEA 0183 Listener.
– Oscilloscope for NMEA 0183 signal test, general electronic circuits.
Most of all, NMEA Tester let you are free from the problem of carrying big/weight a laptop computer (or protocol analyzer).
ZNT-300 NMEA Tester / Monitor / Simulator
91 x 62 x 13 mm / 100g
Brochure
1. General Specifications
Display | Full color 2.8″ TFT LCD 65K 320×240 |
Input | Impedance > 500kohm |
Max. Input Voltage | 80Vpp (By x 1 Probe) |
Upgrade | Via USB |
Power Supply | 500mAh 3.7V Lithium Battery or USB Connector |
2. NMEA Tester, NMEA Monitor
Min. Input voltage | Min. 1.4V |
View Mode | Raw data – Display raw NMEA 0183 or Binary signal Summary – Display data value of NMEA 0183 sentence |
Logging | Save Screen capture image, Monitoring Data It can be viewed at PC via USB cable |
Baudrate | 1,200~115,200bps. Manual select, Automatically detect and select. |
3. NMEA 0183 sentence Generator, Pulse Generator
NMEA 0183 Sentences | Generates mainly used NMEA 0183 sentences. Currently, about 16 NMEA 0183 sentences. Of course, continuously upgrade with Customer requirements. |
Pulse signal | 10Hz~1MHz square wave |
4. Oscilloscope
Analog Bandwidth | 0~20kHz |
Max. Sample Rate | 1Msps 12Bits |
Horizontal Sensitivity | 1uS/Div~10S/Div |
Horizontal Position | Adjustable with indicator |
Vertical Sensitivity | 10mV/Div~10V/Div(with x 1 probe), 0.5V/Div~100V/Div(with x 10 Probes) |
Vertical position | Adjustable with indicator |
Measurement | – Frequency, Cycle time, Duty cycle. – Peak / RMS / Average / DC voltage. – Precise vertical / horizontal measurement with markers. – Hold/Run |
Waveform storage | Micro SD card |
PC connection via USB | As SD card reader |
5. Options
Customizing | Customizing is available for user requirements. |
– This specifications may be changed without any notifications. – If you advise good idea or improvement for our products, we will consider it for the products. – In case of any other specifications, please contact us. – The best strength of our product is high reliability and it will give you the best value. |
[hr top]
NMEA-AIS Simulator – ZNS-890
[dropcap1]Z[/dropcap1]NS-890 NMEA-AIS Simulator is a high-performance simulator which consist of NMEA simulator software and Serial output hardware, and optionally AIS simulator software.
NMEA simulator software generates NMEA-0183 virtual data for ship devices and NMEA sensors, either separately or as an integrated ship.
AIS simulator is for AIS data for up to 10 class A vessels. In addition, a Base station including up to 7 VTS targets, a SAR Aircraft, a class B vessel, an Aid to Navigation, an AIS-SART and a Long-range vessel might be simulated.
Serial output device is very high performance and has 9 NMEA-0183 output ports.
ZNS-890 NMEA Simulator
207 x 130 x 50 mm / 0.5kg
Brochure
1. Features
1. Features – Data output on serial port, Real or Virtual – All sensors are controlled independently, or are controlled by ship movements – Using for testing NMEA-0183 devices, and training in Maritime education – Using for testing and/or demonstration of AIS presentation on ECDIS/Radar display 2. System Configuration 1) NMEA Simulator Software 2) NMEA-0183 Serial Output Device (ZMG-390 9ch Serial/NMEA Ethernet Gateway) 3) AIS Simulator Software (Optional) |
2. Specifications
1) NMEA Simulator Software | |
GPS 1/2 | – GGA / GNS / GLL / RMC / VTG / GSA / GSV / GST / DTM / ZDA |
Gyro 1/2 | – THS / HDT / ROT / PRATT / PRDID |
Speed Log | – VHW / VBW / VDR |
Echo Sounder | – DBT / DPT |
Wind Sensor | – MVW |
ARPA Radar | – TTM / TTD / TLB |
2) AIS Simulator Software | |
User | – Up to 10 users control standard Class A vessel |
Targets | – Base station includes up to 7 VTS targets – A SAR aircraft, a Class B vessel – Aid to Navigation, an AIS-SART and a long-range vessel |
Control | – Random control of AIS object |
3) Serial Output Devices (ZMG-390 9ch Serial/NMEA Gateway) | |
1) Serial Ports | |
9ch Serial Ports | – 9 Tx Channels, RS422 Output (NMEA-0183) – 2ch Tx for Galvanic isolation |
Baud Rate | – 1,200bps ~ 230,400bps by each port (9 steps) |
Configuration | – Baud Rate, Date Length, Parity bit and Stop bit by each channel |
2) Ethernet | |
Protocol | – TCP/IP UDP Unicast ans Multicase – IEC61162-450 Light Weight Ethernet Protocol (Pro only) – TCP/IP TCP and HTTP for System configuration |
Speed | – 10/100Mbps |
3) Input Power | |
Voltage | – DC 12/24V (10 ~ 32V), Approximately 400mA at 12V |
Fuse | – Electric Fuse, No Replacement required |
4) Physical Specifications | |
Dimension / Weight | – 207 x 130 x 500 mm (Including Terminal Blocks) / 0.5kg |
3. Options
Customizing | Customizing is available for user requirements. |
– This specifications may be changed without any notifications. – If you advise good idea or improvement for our products, we will consider it for the products. – In case of any other specifications, please contact us. – The best strength of our product is high reliability and it will give you the best value. |
[hr top]