Loading-Bar
Zinnos
Sitemap
NMEA-0183 to/from Analog Converter (Gyro-compass, Rudder, Speed-log, Anemometer, Dry contact, etc. by Zinnos Inc.

Products

bul03 NMEA 0183 Converter

bul_h Products > NMEA 0183 Interface > NMEA 0183 Converter

ZNC-401 Universal NMEA Converter

ZNC-401 Universal NMEA Converter is "Multi Analog Signal to NMEA 0183(IEC-61162-1) Converter for most kinds of Gyrocompass, Anemometer, Speed Log, Rudder.

This is very useful for interfacing between old navigation instruments and VDR, AIS, ECDIS. All information is displayed on the large LCD and a user can adjust dimming and contrast.

It was designed for considering high accuracy and stabilized temperature for using as core parts of Anemometer, Rudder.

It is designed for consider high accuracy and high reliable.
znc401_universal_nmea_0183_converter_rudder_speedlog_pulse_gyrocompass

ZNC-401 
Universal NMEA Converter
176 x 210 x 63mm / 1.5kgs
Brochure
1. Applications
1) Gyrocompass to NMEA Converter
Synchro Signal 1:1, 36:1, 90:1, 180:1, 360:1
AC 26V~115V, 50/60Hz or 400/500Hz
Step Signal 90:1, 180:1, 360:1
DC 25V~75V
NMEA Format $HEHDT,359.9,T**hh<CR><LF>13 LEDs
Option For lower or higher voltage of Step signal is available.
2) Anemometer for NMEA Converter
Angle 1:1 Synch (AC 26V~115V, 50/60Hz or 40/500Hz or DC 0V~5V(10V)
Speed DC 0V~5V(10V) or 4~20mA or 0~1,710Hz pulse at 60m/s(116 Knots)
NMEA Format $WIMWV,359.9,R,60,M,A*hh<CR><LF>
3) Rudder to NMEA Converter
Angle Angle : 1:1 Synch Signal
Rate Rate : 1:1, 2:1 or 4:1 or N:1 Angle rate
NMEA Format $RARSA,359.9,A,,*hh<CR><LF>
4) Speed Log to NMEA Converter
Speed 200 or 400 Pulse at 1 nautical mile
5V~36V Pulse or Dry Contact signal
NMEA Format $VMVBW,49.9,A,,,*hh<CR><LF>,$VMVHW,359.9,T,,,49.9,N,,*hh<CR><LF>
5) Engine RPM
RPM 0~ ±500 RPM at ±5V(or ±10V)
2. Common Specifications
Input Synch, Step, DC ±5V(±10V), 4~20mA, Dry/Pulse Input
Output 3 NMEA Outputs(One port is RS422 & RS232 selectable.)
Input Power DC 18V~32V, AC 15V~23V
3. Options
Input Power DC 12V(DC 9V~17.5V)
Lower Voltage Version ZNC-401L - Synch 10~50VAC, Step 10~45VDC
Higher Voltage Version ZNC-401H - Synch AC 55V~230V, Step DC 55V~165V
Customizing Customizing is available for non-standard equipment and non-standard output data formats.
- In case of any other specifications, please contact us.
- This specifications may be changed without any notifications.
- If you advise good idea or improvement for our products, we will consider it for the products.
- The best strength of our product is high reliability and it will give you the best value.


ZNC-910B / 920 Smart NMEA to Step & Log Converter

ZNC-910B/920 Smart NMEA to Step Gyro Converter converts from NMEA data(HDT) to Step gyrocompass signal.

This Smart NMEA to Step Gyro Converter is useful for interfacing between new Gyrocompass (such Satellite compass or without Step/Synch signal) and many navigation equipment needed for heading signal.



ZNC-910 nmea-0183-converter

ZNC-910B/920 
Smart NMEA Converter
193 x 139 x 49mm / 1.0kgs
Brochure

1.Applications
1) Mode 1 - NMEA to Step(Gyro) Converter(ZNC-910B only)
NMEA Input NMEA 0183 Data(--HDT)
Step Output 90/180/360:1 Stepper Signal(±common)
Use one of main input power or external power
NMEA Output HEHDT, 1Hz, 4,800~38,000bps
2) Mode 1 - NMEA to Speed Log Pulse Converter(with NMEA 0183 Sentence Translator)
NMEA Input --VBW, --VHW, --RMC, --VTG(Automatically recognize)
In case of VBW ground speed has priority
NMEA Output VMVBW, VMVHW, GPRMC, GPVTG Selectable
1Hz, 4,800~38,000bps
Log Pulse Output Dry/Pulse, 200/400/800:1 Selectable
3) Mode 3 - Speed Log Pulse to NMEA Converter(Log Pulse Repeater)
Pulse Input 200/400/800 Pulse/Knot dry or Pulse Signal
5V~25V Pulse or Dry Contact Signal
NMEA Output VMVBW, VMVHW, GPRMC, GPVTG Selectable
1Hz, 4,800~38,000bps
Pulse Output 4 Dry/Pulse or 3 Dry/Pulse + 1 Alarm Output(Default)
Number of Alarm Output Port and Knot are changeable
Alarm Output More than 8/10/12 Knots
2. Specifications
1) Input
Number of Port 1 NMEA 0183 Input Port
RS 422, RS 232, 5V TTL Signal
Protection 1 Pulse Input Port
Pulse width is more than 20mS
Baud Rate 1 Dry Contact Signal Input Port
Pulse Width is more than 20mS
2) Output
Number of Port 1 NMEA 0183 Output Port
Baud Rate 4,800~38,400bps
Step/Pulse Signal Output 3 Step or 4 Pulse Signal Outputs(Open Drain)
Step/Pulse Voltage Depend on internal/external power source
Max. Load Each output support up to DC 75V, Max. 1.0A(ZNC-920 up to DC 55V, Max. 0.5A)
3) Power
External Power Input Step/Log Pulse DC 0V~75V(ZNC-920 up to DC 55V)
Input Power DC 24V(DC 18V~32V)
Appr. 0.15A(Except Step/Pulse Signal)
Remark Selected for Step/Log Pulse Power by Jumper
Electronic Fuse, 1.0A(ZNC-920 Max. 0.5A), No replacement required
4) Physical Specifications
Terminal Block Screwed Terminal Blocks
3. Options
Input Power DC 12V(DC 9V~17.5V)
Customizing Customizing is available for non-standard equipment and non-standard output data formats.
- In case of any other specifications, please contact us.
- This specifications may be changed without any notifications.
- If you advise good idea or improvement for our products, we will consider it for the products.
- The best strength of our product is high reliability and it will give you the best value.


ZAD-120 12ch, 24bit Analog to NMEA Converter

This ZAD-120 12ch, 24bit Analog to NMEA Converter is useful for converting from the voltage and currents to digital signal which is used in the marine industry.

This is high-precision 24bit A/D converter with the digital filter for excellent noise rejection, also it is designed to consider high accuracy and high reliable.

ZAD-120 high reliable analog to NMEA Converter is able to output data through NMEA 0183 and TCP/IP-UDP(Ethernet) protocols simultaneously hence it is very useful instrument for interfacing with various ships equipment such as ECDIS, VDR, RADAR.

It is designed for consider high accuracy and high reliable.
zad-120 anlaog to nmea 0183 converter

ZAD-120 
Analog to NMEA Converter
180 x 210 x 60mm / 1.0kgs
Brochure
1. Features
- High precision 24 bit A/D Converter with Digital filter for excellent noise rejection.
- Various input signals ranges for industry standard(0V~5V, ±5V, 0V~10V, ±10V, 4~20mA).
- No input signal loss caused by very high input impedance circuits(More than 500kohm).
- Supports both Single ended and Different type input signal.
- Very High Common mode noise rejection(Large than DC 100V)
- Outputs a NMEA 0183 standard(XDR) and UDP(TCP/IP) datagram through 100BaseT Ethernet.
- Supports IEC 61162-450 Mode(Optional)
2. Specifications
1) Input
Analog Input 12Ch NMEA 0183 input ports
2) Input Signal
Voltage DC -10V to +10V
Absolute Max Input  DC 100V
Selectable by Jumper
Current DC 4mA 50 20mA
Absolute Max Input  DC 30mA/7.5V
3) Input Impedance
Voltage 500kohm
Current 250ohm
4) Signal Type
Differential Signal Ch1~8 only
Common mode voltage 100V
Selectable by Jumper
Single Ended Signal All Ch.(Ch1~8 Single/Differential Selectable)
5) Digital Outputs
Resolutions Voltage 0.1V or 0.01V
Resolutions Current 0.1mA or 0.01mA
NMEA 0183 Output RS422 Port, "XDR" sentence, 4,800bps~38,400bps UDP(TCP/IP)
Output 100BaseT Ethernet(NMEA 0183 sentence)
Output Data Rate 1Hz or 10Hz
6) Analog to Digital Conversion
Precision 24bit
Accuracy ±0.5% at Full scale
Digital Filter Average 32 times
7) Display
Red LED On : Power On
4 Green LEDs Off/On
D/R(Date Output Rate) 1Hz of 10Hz
Res(Resolution) 1st Decimal Place or 2nd Decimal Place
LWE(IEC61162-450) Normal or LWE(Light Weight Ethernet)
MOD Normal Operating or System Mode
8) Input Power
Voltage DC 24V(DC18V~32V)
Humidity 95%
9)Operating Environments
Temperature DC 24V(DV 18V~32V)
Accuracy ±0.5% at Full scale
Digital Filter Average 32 times
6) Analog to Digital Conversion
Precision 24bit
Accuracy ±0.5% at Full scale
Digital Filter Average 32 times
3. Options
Input Power DC 12V (DC 9V~17.5V)
Customizing Customizing is available for non-standard equipment and non-standard output data formats.
- In case of any other specifications, please contact us.
- This specifications may be changed without any notifications.
- If you advise good idea or improvement for our products, we will consider it for the products.
- The best strength of our product is high reliability and it will give you the best value.


ZRC-100 Resolve/Synch to NMEA Converter

ZRC-100 Resolve/Synch to NMEA Converter is able to output resolve signal received from radar to SHM and BP.

It is useful to plot the images of the old type radar without SHM/BP output on ECDIS.

It is designed for consider high accuracy and high reliable.



(*SHM: Ship Heading Mark, *BP: Bearing Pulse)


coming soon

 
ZRC-100
Resolve to NMEA Converter
180 x 201 x 60mm / 1.0kg
Brochure
1. Specifications
1) Input
>Display 5 LEDs(1 Red+4 Green)
Input Signal Hardware Selectable
Radar Resolve ±6V(PP 12V)m Ref. -900/700/500Hz
Radar Synchro R 115V, S 90V, 60/400Hz
Input Power Voltage DC 18V~32V
Dissipation Appr. 3W
2) Out Pulse
Out Pulse HM(Heading Mark) x 1, BP(Bearing Support) x 2
Voltage DC 5V/12V Pulse(Dry Contact Support)
3) Operating Environments
Temperature +15C to +55C
Humidity 95%
4) Output
Pulse Out DC 5V/DC 12V/Dry Contact - Selectable
Speed 2,048/4,096/8,192 per 2 Sec(1,024/2,048/4,096Hz)
5) Operation
LED PWT Power and turn on always
Blanking at error status(Error status is not defined yet)
HM Turned on while ship heading mark out
2. Options
Input Power DC 12V(DC 9V~17.5V)
Customizing Customizing is available for non-standard equipment and non-standard output data formats.
- In case of any other specifications, please contact us.
- This specifications may be changed without any notifications.
- If you advise good idea or improvement for our products, we will consider it for the products.
- The best strength of our product is high reliability and it will give you the best value.


ZDI-320 32ch, Digital Signal to NMEA Converter

ZDI-320 32ch, Digital Signal to NMEA Converter is available to converter digital signals to NMEA 0183 signal and NMEA 0183 signals to digital signals.

This is very useful for the marine industry. It outputs data at same time through NMEA 0183 and UDP(Ethernet) protocol and it is easy to connect with various equipment such ECDIS, VDR. ​  

It is designed for consider high accuracy and high reliable.

zdi-320 digital signal to nmea converter

ZDI-320 
Digital Signal to NMEA Converter
180 x 201 x 61mm / 1.0kg
Brochure
1. Specifications
1) Digital Input
>Number of Ch 12Channels, Expansion to 256Channels(32Ch x ZDI-320 8EA)
Voltage DC 11V~32V
2) Digital Outputs
Number of Ch 4Ch, Expansion to 32Channels(4Ch x ZDI-320 8EA)
Dry Contact AC 5A/250V, DC 5A/30V
3) NMEA In/Out
NMEA In 1EA, NMEA 0183 Sentence Input for Digital Output
NMEA Out 1EA, NMEA 0183 Sentence Output for Digital Input Data
4) Ethernet
Ethernet Port 1EA, 10/100Mbps
UDP Port 1EA for Digital Input Data
TCP Port 1EA for Console, System Setting
5) CAN Bus
CAN Bus Port 1EA, Using for expansion mode
D/I, D/O Data transfer between board and board
6) Display
D/I LED 32EA
D/O LED 4EA
Status Display LED 5EA
7) Power
Voltage DC 24V
Current 0.3A
2. Options
Input Power DC 12V(DC 9V~17.5V)
Customizing Customizing is available for non-standard equipment and non-standard output data formats.
- In case of any other specifications, please contact us.
- This specifications may be changed without any notifications.
- If you advise good idea or improvement for our products, we will consider it for the products.
- The best strength of our product is high reliability and it will give you the best value.
 
Copyright 2017. Zinnos Inc. all rights reserved.
435-1, Haeyang-ro, Yeongdo-gu, Busan, 49111, Republic of Korea
T. +82 51 404 3454    F. +82 51 404 3421    info@zinnos.com    www.zinnos.com    www.digitalmarine.kr