Pactor MF/HF 모뎀 (SCS)
이 MF/HF 모뎀 P4dragon DR-7800 은, 아마추어 무선 운영자를 위해 설계된 전설적인 PTC-II에서 크게 발전됨 모델 입니다. DR-7800은 PTC-II와 소프트웨어 호환이 가능합니다. 즉, PTC-II는 AirMail, RMS Express, Alpha 같은 기존 소프트웨어를 계속 사용할 수 있습니다.
PTC-II와 포트 핀 호환성으로 인해 PTC-II 기술에서 혁신적인 P4ragon 기술로의 전환이 편리 해졌습니다. PACTOR 연결로 더 빠른 속도와 강력한 성능을 즐기십시오!
The elegant design and the excellently readable and informative OLED display including the simple upgrade facility (updates free of charge!) round off the concept of the absolutely latest shortwave modem from the house of SCS.
우아한 디자인과 단순한 업그레이드 (무료 업데이트 포함) 를 포함하여 탁월하게 읽기 쉽고 유익한 OLED 디스플레이는 SCS에서 절대적으로 최신 단파 모뎀의 개념을 마무리합니다.
DR-7800은, 예를 들어 Winlink 네트워크를 통해 HF 이메일에 이상적으로 사용될 수 있습니다. 외부 적으로는, 특별히 신호 레벨 및 스펙트럼 보기 용으로 구성 할 수 있는 고해상도 OLED 디스플레이로 인해 그 성능은 더욱 강력해집니다. 고 신뢰성과 3W의 저전력 덕분에 이 새로운 모뎀은 조난 라디오 통신 및 기타 가혹한 환경에서의 애플리케이션에 매우 적합합니다.
DR-7800 Pactor MF/HF Modem
172 x 43 x 205 mm / 770g
Brochure
1. Technical Data
Operating Modes | |
Mode-1 | PACTOR-4, PACTOR-3, PACTOR-2, PACTOR-1 Weather-Fax(receive), GPS Decoder |
Processor | Quad Core DSP by Freescale |
Computing Power | 6,400 MIPS |
Permanent Storage | Flash-ROM(Update via the user interface), EEPROM for Parameters |
Operating System | Real-time multitasking operating system |
Connectivity | User Interfaces: – USB – Bluetooth(optional) – Ethernet(optional) – USB-Master(optional) GPS: – GPS Input(RS 232 and TTL) Transceiver: – 2x transceiver ports(“Main” and “Aux”, switchable, optional for dual-port operation, symmetrical or unsymmetrical operation can be chosen, with un symmetrical operation PTC-ll compatible connections) – Input Impedance: 15 kOhm – Output Impedance: 300 Ohm – Output Level(open output): 9V p-p max, freely adjustable – Input Level: Max. 5.5V p-p Audio: – Mic. Input(high impedance) – Speaker Output(low impedance, 2W) |
Display | 64×256 pixel, OLED, blue, high contrast, excellent readability, with no viewing angle problems, brightness adjustable in 16 steps, display of waterfall and spectral views and much more, display modes can be adjusted. |
Time Base | Temperature Stabilized(TCXO, 1ppm) |
Transceiver Control | Over an internal multi-level interface, compatible with Kenwood, Icom and Yaesu transceivers and many other models |
Control Elements | Sensor key for ON.OFF and menu control via the OLED display Rear-side 4xDIP switches for basic configuration |
Power Consumption | 400mA(Max. with 10V input voltage) |
Power Input | Max. Approx. 3W at 13.8V |
Supply Voltage | 10~28V |
Weight | 770g |
Dimension | 172 x 43 x 205 mm |
이 소형 MF/HF 모뎀 P4dragon DR-7400은 P4dragon 모뎀 클래스의 저렴한 가격 버전 입니다. DR-7400은 새로운 하이 엔드 데이터 전송 모드 인 PACTOR-4와 함께 사용하도록 최적화되었습니다. 이는 단파를 통해 탁월하고 빠르고 강력한 데이터 링크를 허용합니다.
대양을 포함한 지구상 어느 곳에서나 가정이나 사무실과 거의 비슷한 이메일 사용이 가능하며, 기존 PACTOR 소프트웨어 (Airmail, RMS Express, Alpha 등)가 계속 사용될 수 있도록 DR-7400 소프트웨어는 PTC-II 시리즈 및 DR-7800과 호환됩니다.
우아한 디자인뿐만 아니라 쉬운 업그레이드 가능성 (무료 업데이트!)은 “Little Dragon” 개념을 완성합니다. 물론 DR-7400은 TRX 원격 제어, GPS 입력 및 (옵션) Bluetooth 인터페이스도 제공합니다.
DR-7400 Pactor MF/HF Modem
125 x 43 x 138 mm / 4500g
Brochure
1. Technical Data
Operating Modes | |
Mode-1 | PACTOR-4, PACTOR-3, PACTOR-2, PACTOR-1 Weather-Fax(receive), GPS Decoder |
Processor | Quad Core DSP by Freescale |
Computing Power | 6,400 MIPS |
Permanent Storage | Flash-ROM(Update via the user interface), EEPROM for Parameters |
Operating System | Real-time multitasking operating system |
Connectivity | User Interfaces: – USB – Bluetooth(optional) – USB-Master(optional) GPS: – GPS Input(RS 232 and TTL) Transceiver audio: – Input Impedance: 47 kOhm – Output Impedance: 1 kOhm – Output Level(open output): 3V p-p max, freely adjustable – Input Level: Max. 3V p-p |
Display | 8 dual-color LED’s(green, red) indicating all important operating states and signal turning |
Time Base | Temperature Stabilized(TCXO, 1ppm) |
Transceiver Control | Over an internal multi-level interface, compatible with Kenwood, Icom and Yaesu transceivers and many other models |
Control Elements | Sensor key for ON.OFF Rear-side 4xDIP switches for basic configuration |
Power Consumption | 400mA(Max. with 10V input voltage) |
Power Input | Max. Approx. 3W at 13.8V |
Supply Voltage | 10~28V |
Weight | 450g |
Dimension | 125 x 43 x 138 mm |
This PTC-IIIusb modem allows direct connection to a USB interface of the modern notebook, and thus expands the SCS equipment program. The PTC-IIIusb is constructed using existing equipment technology and its application is to be found mainly in the connection of clients. As a speciality, the PTC-IIIusb is equipped with a transceiver control port, which allows remote control of the connected radio via software.
PTC-IIIusb Modem
172 x 43 x 205 mm / 770g
Brochure
1. Technical Data
Operating Modes | |
Mode-1 | PACTOR-4, PACTOR-3, PACTOR-2, PACTOR-1 Weather-Fax(receive), GPS Decoder |
Processor | Quad Core DSP by Freescale |
Computing Power | 6,400 MIPS |
Permanent Storage | Flash-ROM(Update via the user interface), EEPROM for Parameters |
Operating System | Real-time multitasking operating system |
Connectivity | User Interfaces: – USB – Bluetooth(optional) – Ethernet(optional) – USB-Master(optional) GPS: – GPS Input(RS 232 and TTL) Transceiver: – 2x transceiver ports(“Main” and “Aux”, switchable, optional for dual-port operation, symmetrical or unsymmetrical operation can be chosen, with un symmetrical operation PTC-ll compatible connections) – Input Impedance: 15 kOhm – Output Impedance: 300 Ohm – Output Level(open output): 9V p-p max, freely adjustable – Input Level: Max. 5.5V p-p Audio: – Mic. Input(high impedance) – Speaker Output(low impedance, 2W) |
Display | 64×256 pixel, OLED, blue, high contrast, excellent readability, with no viewing angle problems, brightness adjustable in 16 steps, display of waterfall and spectral views and much more, display modes can be adjusted. |
Time Base | Temperature Stabilized(TCXO, 1ppm) |
Transceiver Control | Over an internal multi-level interface, compatible with Kenwood, Icom and Yaesu transceivers and many other models |
Control Elements | Sensor key for ON.OFF and menu control via the OLED display Rear-side 4xDIP switches for basic configuration |
Power Consumption | 400mA(Max. with 10V input voltage) |
Power Input | Max. Approx. 3W at 13.8V |
Supply Voltage | 10~28V |
Weight | 770g |
Dimension | 172 x 43 x 205 mm |